Strength Behavior of Veneered Zirconia after Different Surface Treatments
Keywords:
flexural strength; all-ceramics; Y-TZP; delamination
Abstract
Purpose: The aim of this study was to evaluate the flexural strength of a veneered zirconia system after different surface treatments as a pre-cementation procedure and before veneering. Methods: Translucent Y-TZP ceramic bars, for four-point bend testing, were prepared and divided considering the compressive (surface treatment for cementation) and lower tensile surfaces (surface treatment for veneering). Two different surface treatments were evaluated: 1- glass interlayer; 2- sandblasting + glass interlayer. Four-point bending test data were statistically analyzed using ANOVA. Results: The flexural strength was significantly affected by sandblasting the surface for cementation. Sandblasting + glass interlayer on the surface for veneering combined with sandblasting the surface for cementation presented the highest flexural strength and better strength reliability. Conclusion: Sandblasting + glass interlayer on the surface for veneering combined with sandblasting the surface for cementation presented better results regarding flexural strength and reliability.
Downloads
- Article PDF
- TEI XML Kaleidoscope (download in zip)* (Beta by AI)
- Lens* NISO JATS XML (Beta by AI)
- HTML Kaleidoscope* (Beta by AI)
- DBK XML Kaleidoscope (download in zip)* (Beta by AI)
- LaTeX pdf Kaleidoscope* (Beta by AI)
- EPUB Kaleidoscope* (Beta by AI)
- MD Kaleidoscope* (Beta by AI)
- FO Kaleidoscope* (Beta by AI)
- BIB Kaleidoscope* (Beta by AI)
- LaTeX Kaleidoscope* (Beta by AI)
How to Cite
References
Aboushelib MN, Wang H (2013) Influence of crystal structure on debonding failure of zirconia veneered restorations. 29, e97-e102.
Song JY, Park SW, Lee K, Yun KD, Lim HP (2013) Fracture strength and microstructure of Y-TZP zirconia after different surface treatments. 110, 274-80.
Sato H, Yamada K, Pezzotti G, Pezzotti G, Nawa M, Ban S (2008) Mechanical Properties of Dental Zirconia Ceramics Changed with Sandblasting and Heat Treatment. 27, 408-414.
Zhang Y, Kim JW (2009) Graded structures for damage resistant and aesthetic all-ceramic restorations. 25, 781-790.
Toraya H, Yoshimura M, Somiya S (1984) Calibration curve for quantitative analysis of the monoclinic-tetragonal ZrO2 system by x-ray diffraction. 67, C119-C121.
Kosmac T, Wagner R, Claussen N (1981) X-ray determination of transformation depths in ceramics containing tetragonal ZrO2. 64, C72-C73.
Published
2016-10-18
Issue
Section
License
Copyright (c) 2016 Authors and Global Journals Private Limited

This work is licensed under a Creative Commons Attribution 4.0 International License.